manualshive.com logo in svg

Uniden DXAI4588 Series, Руководство пользователя

Поделиться
Скачать
Uniden DXAI4588 Series Скачать руководство пользователя страница 53

52

Symptom

Suggestion

Can’t make or receive calls.

• Re-register both handsets (see page 3).

• Check both ends of telephone line cord.

• Make sure the AC adapter is plugged into the base and wall outlet.

• Disconnect the AC adapter for a few minutes, then reconnect it.

• Change the digital security code (see page 47).

• Make sure that the handset is not too far from the base.

• Check the dialing mode used by your telephone company.

The handset doesn’t ring or 

receive a page.

• Re-register both handsets (see page 3).

• The battery pack may be weak. Charge the battery for 5-20 hours.

• The handset may be too far away from the base unit.

• Place the base unit away from appliances or metal objects.

• Change the digital security code (see page 47).

• Check the battery pack to ensure there is a secure connection.

• Make sure ringer volume isn’t set to "off."

Severe noise interference.

• Keep both handsets away from microwave ovens, computers, remote control 

toys, wireless microphones, alarm systems, intercoms, room monitors, 

fluorescent lights, and electrical appliances.

• Move the base to another location or turn off the source of interference.

Содержание DXAI4588 Series





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды