UniData Communication Systems UNIFIBER GIGAROUTER UF72N Скачать руководство пользователя страница 60

Страница: 60 / 210

Gigarouter

UF72N User Manual

Page 52 of 203

Figure 3-74 Configure PPTP Server

The following items are displayed on this screen:

►

Enable PPTP Server:

Enable or disable the PPTP server function globally.

►

IP Address Pool Range:

Specify the start and the end IP address for IP Pool. The start IP address

should not exceed the end address and the IP ranges must not overlap.

►

Enable Authentication:

Specify whether to enable authentication for the tunnel.

►

Enable Encryption:

Specify whether to enable the encryption for the tunnel. If enabled, the

PPTP tunnel will be encrypted by MPPE.

Click the

Index

in the entry you want to modify. If you want to delete the entry, select it and click the

Del

Click the

Add

button to add a new entry.

Figure 3-75 Add or Modify PPTP Client Entry

The following items are displayed on this screen:

►

Username:

Enter the account name of PPTP tunnel. It should be configured identically on server

and client.

►

Password:

Enter the password of PPTP tunnel. It should be configured identically on server and

client.

►

Binding IP:

Enter the IP address of the client which is allowed to connect to this PPTP server.

►

Description:

Enter the humane readable description for this account.

3.4.7.3 L2TP Server

Choose the menu

Data Service

→

VPN

→

L2TP Server

to load the following page.

Содержание UNIFIBER GIGAROUTER UF72N



















































































































































































































Результаты поиска

Содержание UNIFIBER GIGAROUTER UF72N

Отзывы:

UniData Communication Systems UNIFIBER GIGAROUTER UF72N, Руководство пользователя, Страница: 60 / 210

Результаты поиска

Содержание UNIFIBER GIGAROUTER UF72N

Отзывы: