UniData Communication Systems Starlog Prologger 7001, Руководство пользователя

Страница: 17 / 73

To change this PIN#, turn the display ON and then press CONFIG. Press the
down arrow until CHANGE PIN# appears in the display. Press the left arrow
key to select the digit and then the up or down arrow to alter the digit. Once
you have selected a suitable 4 digit number, press ENTER. It is now
impossible to change important configuration settings until the PIN# is
re-entered.
Once a PROLOGGER has been protected by a non-zero PIN#, you must
re-enter the correct PIN# before altering a configuration via the keyboard.
1.
Press ON to switch the display on.
2.
Press CONFIG.
3.
Press the down arrow until ENTER PIN# appears.
4.
Select the correct 4-digit code (using the arrow keys) and press ENTER.
5.
You can now alter the logger’s configuration.
To change the PIN#, you must enter the old PIN# first. A PIN# of 0 means
that all settings may be changed without PIN# validation (default).
If you forget the PIN#, the PROLOGGER will operate normally but you will
not be able to use the keyboard configuration facility until the PROLOGGER
is returned to UNIDATA for service.
2.8.6 Displaying the Scheme List
The Model 7001 PROLOGGER has a four line liquid crystal display (LCD)
and eight key keyboard.
Using the Version 3 Software you can set-up the PROLOGGER to display
the actual values being recorded by connected transducers. This Scheme
Display List contains information similar to the Scheme Test Mode screen. A
one-line display entry is provided for each Scheme Test Mode entry. Four
entries (lines) are shown on the display at one time.
When you press the up/down scroll keys the display moves up/down this list
one line at a time.
PROLOGGER Hardware
PROLOGGER OVERVIEW 11