unicraft HZ 751, Руководство по эксплуатации

Страница: 8 / 20

8 HZ-Serie | Version 1.03
Description of the device
The delivery packaging is made of cardboard, so
please dispose carefully by having it chopped up and
given to the recycling collection.
The film is made of polyethylene (PE) and the cushioned
parts of polystyrene (PS). Deliver these substances to a
collection point for recyclable materials or to the waste
disposal company which looks after your region.
5.3 Storage
The lever hoist should be lubricated and then stored in a
dry, frost-free environment. Do not set anything down on
the lever hoist.
6 Description of the device
6.1 Image
Fig. 3: Description of the device
1 Support hook with safety bracket
2 Handwheel
3 Levers (with choice of position)
4 Load chaine
5 Hand lever with rubber handle
6 Load hook with safety bracket
Illustrations in these operating instructions may deviate from
the original.
6.2 Safety marking on the lever hoist
The following safety markings are attached to the lever
hoist (Fig. 4). They have to be observed and followed.
Fig. 4:
safety markings
The safety markings which are applied on the lever hoist
must not be removed. Damaged or missing safety mark-
ings may lead to errors, personal and material dam-
ages. Immediately replace them.
The lever hoist must be put out of operation from the mo-
ment when the signs are unable to be recognized and
understood at first glance, until new signs are attached.
6.3 Function
The lever hoist has three functions:
Position NEUTRAL
Pulling through the load chain.
Position UP
Lift the load upwards or pull the load.
Position DOWN
Lever down the load.
7 Start-Up
All commissioning work on the hoist must only be car-
ried out by licensed specialists.
Furthermore, all functions of the lever hoist must be
checked.
1
2
4
3
5
6