Unical CoR C24 Скачать руководство пользователя

Страница: 5 / 52

OBLIGATION!

wear gloves

protective

DANGER!

Danger of burns!

1.2 - SYMBOLS USED IN THE MANUAL

Pay special attention when reading this manual to the parts marked by the symbols:

NOTE!

Tips

for the user

ATTENTION!

Possible dangerous

situation for the product

and the environment

DANGER!

Serious danger

to safety

and health

1.3 - APPROPRIATE USE OF APPLIANCE

The

boiler has been built according to the current level of engineering and acknowledged

technical safety rules.

Nonetheless, if improperly used, dangers could arise for the safety and life of the user

and other persons or damage to the equipment or other objects.

The appliance is designed to work in heating systems, with hot water circulation, for

the production of domestic hot water.

Any other use is considered improper.

For any damage resulting from improper use UNICAL AG. S.p.A. assumes no respon-

sibility.

Use according to the intended purposes also includes strict compliance with the in-

structions in this manual.

The user must be instructed concerning the use and operation of his heating system, in particular:

• Deliver these instructions to the user, as well as other documents concerning the appliance

inserted in the envelope inside the packaging.

The user must keep this documentation

safe for future consultation.

• Inform the user about the importance of the air vents and the flue gas exhaust system, high

lighting their essential features and the absolute prohibition of modifying them.

• Inform the user concerning controlling the system's water pressure as well as operations to

restore it.

• Inform the user concerning correct temperature control, control units/thermostats and radiators

for saving energy.

• Please note that, in compliance with the standards in force, the inspection and maintenance of

the appliance must be carried out in compliance with the regulations and frequency indicated

by the manufacturer.

• Should the appliance be sold or transferred to a new owner or if you move and leave the ap

pliance, always make sure that the instruction booklet accompanies it in order to be consulted

by the new owner and/or installer.

The manufacturer will not be held liable in the event of damage to persons, animals or

objects resulting from failure to comply with the instructions contained in this manual.

1.4 - INFORMATION PROVIDED TO THE USER

NOTE!

For further details

refer to the Technical

Information:

at the web address

indicated

on page 2

Содержание CoR C24





















































Результаты поиска

Содержание CoR C24

Отзывы:

Похожие инструкции для CoR C24

Бренды по названию

Популярные бренды

Unical CoR C24, Руководство по установке и обслуживанию

Результаты поиска

Содержание CoR C24

Отзывы:

Похожие инструкции для CoR C24

Бренды по названию

Популярные бренды