Uni-Trend Technology (Chengdu) Ltd.
Page 3 of 27
Communication & Control Software for UTD2025_3025 Series Oscilloscopes User Manual
Chapter 1
Installation of the oscilloscope communication
and control software
1.1 Hardware requirements
Equipment requirements
Minimal.
Oscilloscope
UTD2025_3025 Series Digital Storage Oscilloscope.
Computer
Windows 2000/XP/Vista, 128 MB RAM, 16x CD-ROM or better (Vista users
please refer to its individual hardware requirements), SVGA display or better.
Connection cable
USB A-B cable or RJ45 net cable or GPIB communication cable.
1.2 Installing the software
Your UTD2025_3025 Series Digital Storage Oscilloscope (“Oscilloscope”) comes with an oscilloscope
communication and control software (contained in the CD-Rom supplied with your oscilloscope).
Alternatively, you can download the software online :
File name : UTD2025_3025 oscilloscope communication and control software.
Installation :
Step one :
Insert the CD-rom supplied with your oscilloscope into the CD-Rom drive of the computer.
Wait for the system to read and find the oscilloscope communication and control software
contents (Fig. 1-1).
Fig 1-1
Note :
1. The installation pack downloaded online must be unzipped before application.
2. The software supports Windows 2000, Windows XP and Vista operating systems. On Vista only
USB2.0 communication protocol is supported.
Step two :
Double left click the mouse to run the oscilloscope communication and control software
installation as shown in Fig 1-1.
The installation wizard for the oscilloscope communication and control software will pop up, as
shown in Fig. 1-2.
