Uni-Trend Technology (Chengdu) Ltd.
Page 19 of 27
Communication & Control Software for UTD2025_3025 Series Oscilloscopes User Manual
Reverse mathematics function :
Indicator on means reverse mathematics function is in process. Indicator
off means reverse mathematics function is not in process.
Mathematics function :
Select mathematics functions with the function menu in the menu bar.
Auto Refresh :
Set up the refresh time interval with the waveform refresh menu in the menu bar.
Refresh time :
Set up refresh time while performing auto refresh.
2.4
Transmission interface and explanatory notes
To select USB or LAN to control communication, click the “transmission interface” button on the virtual control
panel of the communication and control software to enter the “transmission interface” operation screen. Here, you
can enable remote interface transmission as shown in Fig 2-11. The virtual display panel shows the waveform and
interface of the oscilloscope. The virtual control panel is a virtual operation panel of your digital storage
oscilloscope. You can control and operate the unit from here.
Fig 2-11
Menu :
Function selection :
Saving and exiting screen
Save :
Select “Single” as in Fig 2-11 to save the waveform and screen on the virtual
display panel in *.bmp format on the computer hard disk or mobile USB device.
Exit :
Quit the remote control transmission interface mode.
Serial :
When “serial” is selected, the waveform on the virtual display panel will be updated in real
time and in synchronization with the waveform stored by the oscilloscope. In this mode,
data volume is sizeable and control response is slower.
Single :
When “single” is selected, the waveform on the waveform display screen is not displayed in
synchronization with the waveform stored by the oscilloscope. In this mode, data volume is
limited and control response is faster.
Close :
Close the transmission interface and return to the main control panel (Fig 2-1).
Virtual display panel
Virtual control panel
Operation mode
