UTD1000L User Manual
11
Press
V
a vertical scale shall be relatively
increased or reduced.
: Selection key
the selection for
switching channel vertical shift and trigger
level shift under normal conditions
If vertical
shift have been selected, the vertical reference
triangle cursor on the screen shall be solid and
you can move vertical position on the screen
of the waveform by adjusting the up down
keys
If press the key SELECT again
the
vertical triangle cursor of trigger level position
shall be solid and you can change the trigger
position by adjusting the up/down keys.
In the MEASURE menu the key used to
confirm the selected Customization parameter
switch cursor 1 and cursor 2 under the cursor
measurement
:
“ ”，
:
.
/
.
,
,
;
.
Direction key and OK key OK key used
to hide display the present menu bar
:
/
under normal circumstances under the
multimeter (DMM) mode, the keys are used to
confirm the correct connection of 10A
in A gear current measurement
Open trigger main menu and select
trigger coupling mode and automatic normal trigger
mode by the key F3/F4
;
.
/
.
CURRENT
DIVIDER
SHIFT
OK : Store present display interface into
the storage and outputted from the host computer
SHIFT
AUTO : open the full-automatic setting
function, under which, the oscilloscope shall adjust
vertical scale and scanning time base automatically
with the changes of input signal and display
the waveform in the fittest form without manual
intervention
SHIFT
F1
Introduction about the shortcut operation
:
;
.
+
+
+
:
+
+
+
