User’s Manual Series
Instruments.uni-trend.com
38
/
40
If user want to save the current setting when <Function Setup>, <System Configuration> and
<Channel Setup> is set, press
【
File
】
key at the bottom of the screen, press
【
More 1/2
】
and press
【
USB
】
to enter file management page.
Two functional keys at the bottom of the screen.
Functional Key
Description
Local disk
Switch to file management of the instrument
Save to local
Save the instrument’s setting file of external USB into
the device.
Delete
Delete the instrument’s setting file of USB
11.2.1
【
Save to Local
】
In order to facilitate the customer to quickly set the instrument in batches, the instrument
supports external USB save to the instrument. Other instrument can read the setting parameter
from USB. USB supports up to 20 external files.
Note: If the file name in USB is the same as the local file, it will be overlay the orginal file.
12.
Remote Control
12.1 RS-232C
User can use RS-232 to connect a controller (PC orPLC) via UNI-T RS- 232 DB-9 serial
communication line. The serial port uses the RS-232 standard for the transmit (TXD),
receive (RXD), and signal ground (GND) lines. Hardware handshaking CTS and RTS lines
are not used.
Caution:
Only UNI-T's (non-modem) DB-9 cable can be used.
The power cable should not over 2 meters.
