User’s Manual Series
Instruments.uni-trend.com
28
/
40
8.3 Judgement of Upper/Lower Limit
After the comparator is enabled and the upper/lower limit of channel is set, press
【
Test
】
key to enter
<Measurement> to start data acquisition.
Figure 8-3 Alarm for Over Upper Limit
If the measured value exceeds the upper limit, the temperature data will display with red color.
If the measured value exceeds the lower limit, the temperature data will display with blue color.
Figure 8-4 Alarm for Over Lower Limit
If the comparator function has been turned on, the instrument will immediately give an alarm when
the measured value exceeds the upper or lower limit.
To disable the alarm, return to <Setup> page to turn off beep function.
9.
[Setup]
9.1 <Function Setup>
Press
【
Setup
】
quick key on the panel to enter <Function Setup> page.
This page is to set measurement, including the following parameters.
Com – Turn on/off comparator function (refer to section 8.1)
Beep - Turn on/off beep (refer to section 8.1)
Key beep - Turn on/off key sound
Rate - Sampling rate
Unit - Temperature unit
Auto-start - Auto-start after power outage -
Restore to the last measurement state
Com setup
