User’s Manual Series
Instruments.uni-trend.com
16
/
40
6.2 Test Line and Installation
The instrument is equipped with Type K thermocouple test line as shown in Figure 6-1 8-
channel test module. Each 8-channel temperature test module includes 8 test line, so that it
can measure the temperature of 8 channels at the same time. Type and specification of test
module is as follows.
Type and name: UT-T21M 8-channel test module
Type K thermocouple
Length: 2 meters×8
Temperature range of Type K test line: 0~200
℃
Accuracy: ±1.5
℃
Figure 6-1 8-channel Test Module
Note: Please make sure that the temperature of DUT is within the range of the test line before
connecting the test probe to DUT.
Test module
/16+/24+/32+/40+/48+ is respectively equipped with 1/2/3/4/5/6 group.
Installation Steps
Ensure that the power of the instrument is shunt down before connecting the test line to the port of
data acquisition module at the rear.
1.
As shown in Figure 6-2, place the test line interface face up and keep it with the data
acquisition module port of the instrument on same level.
2.
As shown in Figure 6-3, plug test line into eight slots of the instrument.
3.
Other channel is connecting as the same way.
Figure 6-2 Data Acquisition Module Port of Instrument
