UNI-T UDP3000S Series, Руководство по программированию

Страница: 17 / 49

Programming Manual UDP3000S Series
Instruments.uni-trend.com 17 / 49
For Example
：
:OUTPut:STATe? CH1
Return
：
ON
:OUTPut:CVCC?
Format
：
:OUTPut:CVCC? [CH1|CH2|CH3|SER|PARA]
Function
：
Query the status of the constant voltage and constant current of a certain channel.
Description
：
If the channel parameter is ignored, then the current channel which is the channel need to be
queried by default. It returns“CV | CC”.
For Example
：
:OUTPut:CVCC? CH1
Return
：
CV
:OUTPut:OVP:VALue
Format
：
:OUTPut:OVP:VALue [CH1|CH2|CH3|SER|PARA,] {<vol>|MINimum|MAXimum}
Function
：
Set the overvoltage protective value of a certain channel and set the channel as the current channel.
Description
：
If the channel parameter is ignored, then the current channel which is the channel need to be
controlled by default. “CH1, CH2”can only be selected in normal mode; “SER” can only be selected in serial
mode; “PARA”can only be selected in parallel mode.
For Example
：
:OUTPut:OVP:VALue CH1, 5
:OUTPut:OVP:VALue?
Format
：
:OUTPut:OVP:VALue? [CH1|CH2|CH3|SER|PARA]
Function
：
Query the overvoltage protective value of a certain channel.
Description
：
If the channel parameter is ignored, then the current channel which is the channel need to be
queried by default.
For Example
：
:OUTPut:OVP:VALue? CH1
Return
：
5.00
:OUTPut:OVP[:STATe]
Format
：
:OUTPut:OVP[:STATe] [CH1|CH2|CH3|SER|PARA,] {0|1|OFF|ON}
Function
：
Set the overvoltage protective switch of a certain channel and set the channel as the current channel.
Description
：
If the channel parameter is ignored, then the current channel which is the channel need to be
controlled by default. “CH1, CH2”can only be selected in normal mode; “SER” can only be selected in serial
mode; “PARA”can only be selected in parallel mode.
For Example
：
:OUTPut:OVP:STATe CH1, ON
:OUTPut:OVP[:STATe]?
Format
：
:OUTPut:OVP[:STATe]? [CH1|CH2|CH3|SER|PARA]
Function
：
Query the overvoltage protective switch of a certain channel.
Description
：
If the channel parameter is ignored, then the current channel which is the channel need to be
queried by default. It return“ON | OFF”.