USER MANUAL - URS600CE AND URS600CESS JULY 2019
9
1.6. Working
principle
Contaminated solvent consists of the original solvent together with, when used, liquid and solid materials.
The recycling process separates the original solvent from the waste materials. During the process, the
tank which is filled with the contaminated solvent is heated by the heating element. When the URS600CE
is at temperature, the solvent boils. The vapour is fed through the vapour outlet fitting to the condenser,
where the clean solvent condenses back to a usable liquid. Waste materials in the contaminated solvent
boils at a temperature that is much higher than the boiling set temperature, the waste materials, therefore
do not vapourize and remain in the distillation tank. At the end of the process, these waste materials
which are collected in the liner bag, can be disposed of in accordance with local regulations.
Safety cover
Tank lid
Condenser discharge pipe
Tank
Condenser
Heating element
Receiving container
Figure 1.
Main components of the URS600CE
1.7. Limitation of Liability
Uni-ram Corporation accepts no liability for damage by:
• Failure to follow this manual.
• Unintended use.
• Maintenance by unqualified personnel.
• Unauthorized modifications.
• Unaurthorized technical changes.
• Use of spare parts not recommended by the manufacturer.
Uni-ram Corporation is not responsible for damage to equipment after it has left the warehouse.
1.8. Transportation
The URS600CE weighs approximately 60 kg. Always lift the URS600CE with at least two people to avoid
injury.
1.9. End of lifecycle
When the URS600CE is no longer used or can be used, it must be disposed of in accordance with the
regional regulations regarding the disposal of electrical equipment.
