10
caldoungaro.it
Chrono
Program
Three types of programming are available: Daily, Weekly, Week-end. After having chosen the
program:
• with the arrow buttons 6 or 4 select the time slot to program
• enter in modification mode by pressing the button 3 (the time slot starts to blink)
• modify the time with the buttons 6 or 4
• to save the programmation press the button 3
• enable (a “
√
” sign appears) or disable the time slot (a “
√
” disappears) by pressing the
button 2.
Monday
ON
OFF
09:30
11:15 √
00:00 00:00
00:00 00:00
Monday
Tuesday
Wednesday
Thursday
Friday
Mon-Fri
Sat-Sun
Chrono
Program
Daily - Choose the day of the week and set the time slots for ignition and extinguishing.
Chrono at midnight - Set the hour of ON of the previous day, for example at 20:30. Set
the hour for OFF of the previous day at 23:59. Set the hour for ON of the next day at 00:00.
Set the desired hour for OFF of the next day, for exapmle at 06:30. The appliance will start
Tuesday at 20:30 and will shut down Wednesday at 6.30.
Weekly - For each day of week the programming is the same
Week end - The same time slots for ignition and extinguishing on working days Monday-
Friday and different operation time slots for Saturday and Sunday.
Refill
In this menu can be activated the calculation of the pellet remaining in the tank basing on the current con-
sumption. Four levels of the tank load will be shown on the display: 100% (full tank), 75%, 50%, 25%, 0 (Refill
menu disabled ). If you wish to use the Refill function, every time after loading pellet, insert an approximate per-
centage of tank load. If the load is the same as the last percent inserted manually, press and hold for 3 seconds
the button ESC to confirm. During the operation of the generator, the function “Refill” will show on the display an
alert when the tank load is less than 20%.
After 3 hours this message becomes alarm Er18, this error appears when the pellet load in the tank is les than
10%. Make sure to insert the correct percentage of the pellet loaded in the tank, otherwise can appear an alarm
Er03 (load overestimated).
Soft Mode
The Soft Mode can be enabled and disabled in this menu. It introduces reduced power, without taking in conside-
ration the thermal request of the house.
