Table of Contents
Index
For information on using Macintosh software to choose audio input and
output options, record an alert sound, or play audio CDs, see the
“Sound” topic of Macintosh Guide, available in the Help menu.
For specific instructions on connecting a microphone, skip to the next
section, “Connecting and Positioning a Microphone.” For specific
instructions on connecting speakers, see “Connecting External Stereo
Speakers,” later in this chapter .
To connect audio equipment to the SuperMac J700 computer:
1.
Make sure that the audio equipment has a cable with a
stereo miniplug connector. If it does not, attach an
adapter that has a
ste reo miniplug.
2.
Place the audio equipment near the
SuperMac J700
computer.
3.
Attach the cable to the audio equipment and to the
appropriate audio port on your
SuperMac J700 c om-
puter.
To record incoming sound on the computer, connect a PlainTalk or
PlainTalk-compatible microphone to the Audio In port on the com-
puter.
To record the sound produced by the computer or play that sound
through external speakers, connect the input on the audio equip-
ment to the Audio Out port on the computer.
Adjusting Volume and Sound
You can adjust the volume on your computer with the
■
volume control sliders in the Monitors & Sound control panel, as
shown below. The Monitors & Sound control panel can be found in
the Control Panels folder in the Apple menu.
■
volume control slider in the CDT Remote if you are playing an
audio CD. The AppleCD Audio Player can be found in the Apple
menu. The volume set in the Monitors & Sound control panel also
affects the volume of the audio CD.
■
volume controls on front of your monitor if your monitor comes
with built-in speakers.
For more information about sound, see the “Sound” topic of Macintosh
Guide, available in the Guide menu.
