um Unverferth 2750 Скачать руководство пользователя страница 61

Страница: 61 / 112

3-15

Assembly

OPTIONAL LIGHT KIT

Park the empty unit on a fi rm, level surface.
Block the wheels on the machine to keep it
from moving. Set the towing vehicle’s parking
brake, shut-off the engine, and remove the
ignition key.

2. Remove the lower cover of the bracket

weldment on the conveyor. Retain hardware
removed. See fi gure 1.

4. Install light to mounting bracket (26791B)

using hardware included with light (26789).
See fi gure 3.

REMOVE LOWER BRACKET

FIG. 1

Attach light mount bracket (26791B) to the
bracket weldment using the hardware previ-
ously removed in Step 2. See fi gure 2.

LIGHT MOUNT BRACKET

USE PREVIOUS HARDWARE

INSTALL LIGHT TO MOUNTING BRACKET

Plug wire from light (26789) into wire har-
ness (902155). See fi gure 4.

CONNECT WIRE FROM

LIGHT TO WIRE HARNESS

Route wire harness along conveyor following
hydraulic hoses and secure using provided
cable ties (9000106). See fi gure 5.

ROUTE WIRE HARNESS

ALONG CONVEYOR

FIG. 2

FIG. 3

FIG. 4

FIG. 5

Содержание Unverferth 2750

















































































































Результаты поиска

Содержание Unverferth 2750

Отзывы:

um Unverferth 2750, Руководство оператора и каталог запасных частей, Страница: 61 / 112

Результаты поиска

Содержание Unverferth 2750

Отзывы: