um Unverferth 2750, Руководство оператора и каталог запасных частей, Страница: 21 / 112

1-9
Operation
Raise fl exible hopper by sliding lever to the
upright position. Locate wagon or bulk seed
container over conveyor hopper and operate
conveyor to fi ll seed tender box.
When fi nished loading seed into the seed tender,
move wagon or bulk seed container away from
conveyor. Pivot conveyor hopper back under the
seed tender box, and latch in place. Conveyor
should be placed back in the transport position
and secured with the klik pin.
IMPORTANT: When pivoting conveyor, be cer-
tain to pivot back in the direction it originally
came from. Do not pivot conveyor round and
around. Doing so will twist hydraulic hoses at
pivot point resulting in damage to hoses and
potential hydraulic failure.
IMPORTANT: Conveyor must always be latched
in cradle except when self-fi lling seed tender
box.
Hoses are shown
twisted, resulting in
damage to hoses and
potential hydraulic
failure.
Cradle Latch Handle
LADDER
1. To use ladder, extend lower extension ladder
from transport position by sliding bottom rung
out until it stops. Lower extension ladder to-
wards the ground.
2. When not using ladder be sure to raise lower
extension ladder upward and slide back into
the transport position.
Ladder shown in
transport position
Extension ladder
shown fully extended
Slide extension
ladder out and lower
towards the ground
Revised 082310-1