Ulvac G-TRAN SW100-A, Инструкция по эксплуатации

Страница: 33 / 75

SK00-9663-EI-003-00
33
7.6. Status
Indicates the filament disconnection, setpoint status, etc.
Use the characters 0 to 9 and A to F by changing them from hexadecimal to binary.
SH (Higher status)
There is no status in SH with this unit.
bit Status F 「 46 」
B7 N ･ C 1
B6 N ･ C 1
B5 N ･ C 1
B4 N ･ C 1
SL (Lower status)
bit Status C 「 43 」 4 「 34 」 6 「 36 」 5 「 35 」 7 「 37 」
B3 ERROR 1 0 0 0 0
B2 N ･ C 1 1 1 1 1
B1 SETPOINT2 0 0 1 0 1
B0 SETPOINT1 0 0 0 1 1
ERROR 1: Error 0: Normal
SETPOINT2 1: ON 0: OFF
SETPOINT1 1: ON 0: OFF
Example 1 ） The N.C. value of the current B2 is 1.
N ･ C : 1 ERROR OF : 0
N ･ C : 1 N ･ C : 1
N ･ C : 1 SETPOINT2 ON
: 1
N ･ C : 1 SETPOINT1 OFF : 0
When above signal is read.
SH : F 〔 46H 〕
SL : 6 〔 36H 〕
Example 2 ） The default values when power is turned on is as follows.
N ･ C : 1 ERROR OF :0
N ･ C : 1 N
･ C :1
N ･ C : 1 SETPOINT2 ON :0
N ･ C : 1 SETPOINT1 OFF :0
SH : F 〔 46H 〕
SL : 4 〔 34H 〕