5
Connecting Hollow Instruments
The
Hygea 6427
is supplied with an accessory kit, which allows hollow lumen instruments to be
connected to the manifold to allow the internal surfaces of the instruments to be cleaned.
All tubing connections are made via small stainless steel clips.
To use these, press the small stainless clip in towards the pipe and pull the connector straight up,
the connector is then pushed into the other receptacle.
1.
The tubes can be connected to the manifold by inserting the connections into the luers located
on the manifold.
2.
Connect the basket by inserting the connector into the luer located on the top of the tank.
3.
Connect the other end of this hose to the manifold located on the basket.
