31
Detergent
In order to provide the best cleaning results, a cleaning detergent must be used with the
ultrasonic bath.
Ultrawave recommend the Ultraclean M2 for use in the
Hygea 6427.
Ultraclean M2
is a general purpose, non-enzymatic detergent suitable for use on all
medical instruments.
Packaged in a 1 litre bottle, between 640ml and 1600ml of
Ultraclean M2
should be
added to the
Hygea 6427
every time the bath is refilled. It is recommended that this
occurs twice daily.
The Safety Data Sheets for these detergents are available on the Ultrawave website
www.ultrawave.co.uk
. [Visit the Downloads section of the Product Support area of the site]
For more information, contact us via e-mail at
or call on
+44 (0) 845 330 4236.
Cleaning the Hygea 6427
It is important to keep your bath clean. Not only will contaminated liquid reduce the
performance of the bath, it may also damage it. Change the cleaning liquid regularly.
Your cleaning process will determine how often to change the liquid – the more soiled
your items, the more often you will need to change the liquid. Change the cleaning liquid
at least daily.
The base of the bath generates the ultrasonic activity by vibrating at very high speeds. If
any contaminants are in contact with the bath, they act as an abrasive, causing wear on
the metal surface. In extreme cases, the bath will develop holes and start to leak.
Portable Appliance Testing should be conducted with water in the bath.
There are no user serviceable parts inside. All service and repair should be referred to
qualified Ultrawave approved engineers only.
Service contracts for your
Hygea 6427
ultrasonic bath are available from Ultrawave or its
agents.
Contact our Service Department on:
Tel:
+44 (0) 845 330 4238
Email:
