27
4.
Using the Ultrawave Cycle Validation Software
When the Cycle Validation Software is installed and opened the below screen will display:
There are two options available:
1.
View the Cycle Results stored on the PC (this allows the operator to see previous
cycle data that has already been saved to the program)
2.
Copy Cycle Results from MC Card (this allows the operator to copy the data from
the MC Card to the PC)
If option 1 is chosen, and data is already saved to the PC, the data will display in the
below format.
If you wish to copy new cycle data to the software, click on the Copy Cycle Results from
MC Card button. You will need to ensure that the MC card is inserted into the card reader
and this inserted into the USB port on your PC.
When the button is pressed, a pop up will display asking if you wish to delete the cycle
data off the MC card. Ultrawave recommend that this data is deleted to prevent
duplication.
When the data is stored in the programme, the individual cycle information results can be
viewed. Select one cycle by clicking the tick box in the Cycle column on the left hand side.
