13
If the cycle validation mode is set to save to the MC card (either as well as or instead of
the hard copy ticket), a digital record can be saved to the supplied MC card.
Note:
in order for the data to save to the card, the MC card must be inserted into the MC
port on the control panel before your
Hygea 6427
is switched on.
The digital cycle traceability will save the information of each cycle (as shown on the
ticket on page 12) to the MC card.
This information can then be transferred to a PC and an electronic copy saved, using the
Ultrawave Cycle Validation software supplied on the MC Card. It is recommended that the
MC Card is removed and the information transferred to the PC at the end of each clinical
session (twice a day).
When the data recording is complete, the following screen is displayed:
To print another copy, press the “Yes” button. This can be done as many times as needed.
If a copy of the print-out is not required, press the “ESC” button.
The lid will then unlock, allowing removal of the instrument trays.
Insert MC
card here
