Ultrasonix Sonix MDP, Руководство по обслуживанию

Страница: 117 / 148

SonixMDP/SP/OP Service Manual 00.053.205, Revision A Chapter 8: DICOM
8-21
To Configure Print Brightness and Contrast Settings:
1.
Press the console button.
2. Select Administrator > DICOM > Print… > Brightness and Contrast .
3.
Select the appropriate Brightness and Contrast levels.
4. Select OK to accept the changes or Cancel to exit without saving.
To Configure AE Configuration-Specific Print Settings:
1.
Press the console button.
2.
Select Administrator > DICOM > Print… > AE Configuration > Settings… > Print Settings .
3. Complete Print Settings as required.
4.
Select OK to accept the changes or Cancel to exit without saving.
Note: Refer to 8.1.3.2 for details on these options.