Ultraflex T93ZT, Руководство по установке и обслуживанию

Страница: 9 / 36

T93ZT STEERING SYSTEM
-
page 9
of 35
Installation and maintenance manual
ULTRAFLEX
E
N
G
L
IS
H
4 Lock the end fitting with screw (2). Torque: 6
Nm (53 inch lbs).
5 Slide bushing (3) over the helix cable and
introduce it into hole (B) of the helm.
6 Insert bushing (3) completely and lock it by
means of screw (4). Torque: 6 Nm (53 inch lbs).
7 Insert protection pipe (5) on bushing (3).
8 Fix the conduit every 2 m (6"). The conduit must not be fixed to the electric wires. Bulkhead openings
require a minimum 38mm (1
½
") hole diameter.
Prevent any dust or foreign material from contacting
the cable end to avoid damages to the helm.
DANGER
9 Make sure the direction of the steering wheel rotation corresponds to the boat direction
.
This control must be carried out before the boat is operated in the water.
DANGER
Make sure the conduit does not enter in contact with
cutting edges that could damage it.
DANGER
2m
2m
T93ZT
5
T93ZT
4
2
T93ZT
T93ZT
3
B