Ultraflex T93ZT, Руководство по установке и обслуживанию

Страница: 8 / 36

Installation and maintenance manual
ULTRAFLEX
page 8
of 35 -
T93ZT STEERING SYSTEM
E
N
G
L
IS
H
3 INSTALLATION
3.1 Necessary tools
Phillips
screwdriver
Open end
wrench
10mm [0,39”]
3.2 Helm positioning
To install the helm on the boat, please refer to the assembly instructions supplied with
ULTRAFLEX
X34 -
X35 - X90 bezel kits.
3.3 Connection of the cable to the helm
1 Determine the correct entry position of the cable into the helm according to the proper steering
system.
PUSH OR PULL TURNING DIRECTIONS
2 R e m o v e
protective pipe
from
cable
ULTRAFLEX
M90
Mach and
insert the helix
cable into the
helm.
3 Turn the steering wheel so as to "pull" the cable into the helm, aligning
the end fitting recess (A) with screw hole (1).
1
A
T93ZT