Wiring Descriptions
MAIN CONNECTOR (6pin)
Pin Function
Description
1-YELLOW
Starter Output
-
This wire will test 0V in OFF, ACCESSORY
and in the ON key positions. 12v during
START ONLY.
2-GREEN
Heater/Acc Output
-
This wire will test 0V in the OFF and
START key positions. 12-14V in the
ACCESSORY key position.
3-RED
12volt Input(30amp)
-
Supplies 12votls for the IGNITION,
PARK LIGHT and SELECTABLE outputs.
4-RED
12volt Input(30amp)
-
Supplies 12 volts for ACC and
STARTER outputs
.
5-BLUE
Ignition Output
-
This wire will test 0V in the OFF and
ACCESSORY key positions.12V in the
IGNITION and START.
6-WHITE
Selectable Output
- O
utput for 2nd IGNITION, 2nd
ACCESSORY or 2nd STARTER
.
AUXILIARY CONNECTOR (14pin)
Pin Function
Description
1-YELLOW
Re-arm(-)
-
0.75 second pulse output when
is pressed and
after remote start shutdown.
Used for factory alarm re-arm.(menu 3)
2-RED/
Trunk Release(-)
- Programmable output. Hold
or
button
WHITE
for 3 seconds, output will stay active
(max 5 seconds) or (-)park light.
3-BROWN
Dis-arm(-)
- 0.75 second pulse when
is pressed and
before remote starter activation.
Used for factory alarm dis-arm.
4-ORANGE
Ground When Running(-)
-Output active during remote start.
Programmable Starter Kill (menu 3)
5-WHITE/ Siren
(+)
Output to activate siren. Menu 1&2
BLUE
6-BLACK/
Parking Brake(-)
- Input to detect (-) when parking brake
WHITE
switch is applied.
INSTALL MANUAL
REMOTE VEHICLE STARTER
PAGE 8
