Ultra Max Perfoma Series Скачать руководство пользователя | Manualshive

Страница: 28 / 56

background image

28

Display Icons 700 Controller

Rev D

1. Days of the week. The flag immediately below the day will appear

when that day has been programmed as a day the system should
regenerate (used with 7-day timer programming).

2. See #3

3. This cursor is displayed when the days between regeneration are

being programmed (used with .5 to 99 day regeneration
programming).

4. One of these cursors will be displayed to indicate which day will be

programmed into the controller.

5. "PM" indicates that the time displayed is between 12:00 noon and

12:00 midnight (there is no AM indicator). PM indicator is not used if
clock mode is set to 24-hour.

6. When "MIN" is displayed, the value entered is in minute increments.

7. When g/L is displayed, the value for regenerant amount entered is in

grams/Liter.

8. When "Kg" is displayed, the value entered is in kilograms or kilograins.

9. Four digits used to display the time or program value. Also used for

error codes.

10. Colon flashes as part of the time display. Indicates normal operation

(742 only).

11. Locked/unlocked indicator. In Level I programming this is displayed

when the current parameter is locked-out. It is also used in Level II
programming to indicate if the displayed parameter will be locked
(icon will flash) when controller is in Level I.

12. When "x2" is displayed, a second regeneration has been called for.

13. The recycle sign is displayed (flashing) when a regeneration at the

next time of regeneration has been called for. Also displayed
(continuous) when in regeneration.

14. The display cursor is next to "SALT" when programming the amount of

regenerant. If the controller is on a 3-cycle filter then backwash time is
programmed.

15. The display cursor is next to "REGEN TIME & DAY" when programming

the time of regeneration and the days of regeneration.

16. The display cursor is next to "TIME & DAY" when programming the

current time and day.

17. The hourglass is displayed when the motor is running. The camshaft

should be turning.

18. These cursors will appear next to the item that is currently displayed.

«
...
26
27
28
29
30
...
»

Содержание Perfoma Series

























































Отзывы:

Нет отзывов

Похожие инструкции для Perfoma Series

Бренд: S&C Страницы: 40

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 12

Бренд: Danfoss Страницы: 60

Бренд: Danfoss Страницы: 20

Бренд: Jands Страницы: 7

coviva Smartbox TKP100A

Бренд: hager Страницы: 34

Бренд: Magellan Страницы: 2

Бренд: Ublox Страницы: 2

Бренд: u-blox Страницы: 19

Бренд: YOKOGAWA Страницы: 150

Бренд: YOODA Страницы: 3

Бренд: YMGI Страницы: 8

Бренд: GEA Страницы: 47

Бренд: NAiS Страницы: 144

Бренд: hager Страницы: 2

Бренд: hager Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды