HyperSpike
®
LineWave Installation and Maintenance Manual
Copyright © Ultra Electronics
– USSI, Columbia City, IN 46725 USA
90243A-MAN-LINEWAVE Rev C
Page 13
5. Lift the LineWave with Pivot Nubs and insert Set Screw into the hole of the bottom L Bracket.
While still holding the LineWave, fasten the top Pivot Nub to the Tie Bars from step 1, using 1-
5/8” Long Screw (Part E), two Flat Washers (Part D), and Lock Nut (Part F).
Figure 12. 90243A-803 and 90243A-804 Wall Mounting
– Step 5
6. To aim the speaker left or right, loosen the top screw and pivot the unit to the desired position
as shown in Figure 13. Once the speaker is in the appropriate position, retighten screw. Pan
angle is adjustable /- 50°.
Figure 13. 90243A-803 and 90243A-804 Wall Mounting
– Step 6
