HyperSpike
®
LineWave Installation and Maintenance Manual
Copyright © Ultra Electronics
– USSI, Columbia City, IN 46725 USA
90243A-MAN-LINEWAVE Rev C
Page 6
2.3. 25V/70V/100V Transformer
– Recommended Hole Locations and Alignment
In order to connect the LineWave’s SJOOW cable to the transformer assembly, utilize the
included Strain-Relief Cord Connector. This connector requires a 0
.740” hole to be drilled in
the transformer assembly. Consult the following recommended hole locations before drilling.
Figure 3. 72575B-801 Recommended Hole Locations,
shown in red dashed boxes
Figure 4. 72542B-801 and 72542B-802 Recommended Hole Locations,
shown in red
dashed boxes
MOUNTING
DIAGRAM
(OPTION 1)
MOUNTING
DIAGRAM
(OPTION 2)
