07
Never leave the charger unattended when it is connected to its power supply.If any malfunction
is found,TERMINATE THE PROCESS AT ONCE and refer to the operation manual.
Keep the charger well away from dust,damp,rain,heat,direct sunshine and vibration.Never drop
it.
The allowable input voltage is 11-18V DC
This charger and the battery should be put on a heat-resistant,noninflammable and nonconductive
surface.Never place them on a car seat,carpet or similar.Keep all the inflammable volatile materials
away from operating area.
Make sure you know the specifications of the battery to be charged or discharged to ensure it meets
the requirements of this charger. If the program is set up incorrectly,the battery and charger may be
damaged. It can cause fire or explosion due to over charging. This warranty is not valid for any
damage or subsequent damage arising as a result of a misuse or failure to observe the procedures
outlined in this manual.
Voltage level:1.2V/cell
Allowable fast charge current:1C-2C(depends on the performance of cell)
Discharge voltage cut off level:0.85V/cell(NiCd),1.0V/cell(NiMH)
NiCd
/
NiMH
Li-ion Voltage level:3.6V/cell
Max.charge voltage:4.1V/cell
Allowable fast charge current:1C or less
Min.discharge voltage cut off level:2.5V/cell or higher
LiPo Voltage level:3.7V/cell
Max.charge voltage:4.2V/cell
Allowable fast charge current:1C or less
Discharge voltage cut off level:3.0V/cell or higher
GHARGER PRO-8
Содержание GHARGER PRO-8
Страница 1: ...GHARGER PRO 8...
