Ultimate GHARGER PRO-8, Руководство пользователя

Страница: 28 / 32

26
You can easily break-in new bushed electric motor using a variable voltage and running time. With this function you
also check the motor performance to optimize your power-train.The break-in process is essential for maximizing the
power of a new brushed motor.New motors have square brushes which press up against the curved cpmmutator.The
goal for the break-in process is to gentle shape the brushed so that they develop a curved surface that fits snugly
against the commutator giving greater conducting surface area and hence lower losses and higher effciency.
The value in the right side of the first line sets the test duration in minutes.The second line
shows the upper limit of current on the left and drive voltage on the right.After setting the
current and voltage,Press”Start/Enter”for more than 3 seconds to start the new process.A
beep tone will sound.(Test time:1-90min,Current:0.1-20A,Test voltage:1-15)
Please press ”Start/Enter” button for more than 3 seconds, and this screen display
the currnet,voltage and test time of digital power .(Max. power: 80W)
MOTOR 0.0A 19.87V
STOP000:00 0.0W
You can stop the test at any time by pressing “Start/Enter”
MOTOR 0.0A 19.87V
DRV 000:43 0.0W
Stauts display.The top line shows the drive current and voltage.The second line shows the
output capacity(mAh) and in the lower right corner alternately displays the output power or
total run time.
GHARGER PRO-8