background image

30

The voltage is higher than which is set.Please check the number of cells in the 
battery pack.

Voltage of one cell in the battery pack is too low,please check the voltage of each
cell.

Voltage of one cell in the battery pack is too high,please check the voltage of each 
cell.

Wrong connection of the connector detected,please check the connector and cable.

The internal temperature is too high,please cool down.

The processor cannot control the feeding current,please repair it.

We guarantee this product to be free of manufacturing and assembly defects for a period of one year from 
the time of purchase.The warranty only applies to material or operational defects,which are present at the 
time of purchase. During that period, we  will repair or replace free of service charge for products deemed 
defective due to those causes.

You will be required to produce proof of purchase (invoice or  receipt) . This warranty is not valid for any 
damage or subsequent  damage arising  as a result of  misuse, modification or  as a  resuit of  failure  to 
observe the procedures outlined in this manual.

GHARGER PRO-8

Содержание GHARGER PRO-8

































Отзывы: