09
To avoid short circuit between the charge lead always connect the charge cable to the charger first,
then connect the battery.Reverse the sequence when disconnecting.
Do not connect more than one battery pack to this charger at any one time.
Please bear in mind the following points before commencing charging:
Did you select the appropriate program suitable for the type of battery you
are charging?
Did you set up adequate current for charging or discharging?
Have you checked the battery voltage?Lithium battery packs can be wired in
parallel and in series,i.e.a 2 cell pack can be 3.7V(in parallel)or 7.4V(in
series).
Have you checked that all connections are firm and secure?Make sure there
are no intermittent contacts at any point in the circuit.
Charging
During charge process,a specific quantity of electrical energy is fed into the
battery.The charge quantity is calculated by multiplying charge current by
charge time.The maximum permissible charge current varies depending on
the battery type or its performance,and can be found in the information by
the battery manufacturer.Only batteries that are expressly stated to be
capable of quick-charge are allowed to be charged at rates higher than the
standard charge current.
Connect the battery to the terminal of the charger:red is positive and black
is negative.Due to the difference between resistance of cable and connector,
the charger can not detect resistance of the battery pack,the essential
requirement for the charger to work properly is that the charge lead should
be of adequate conductor cross-section,and high quality connectors which
are normally gold-plated should be fitted to both ends.
GHARGER PRO-8
Содержание GHARGER PRO-8
Страница 1: ...GHARGER PRO 8...
