Ultimaker Original, Руководство по сборке, Страница: 70 / 109

Step 6: installing the Z stage in the machine Assembling the Z stage
70
6.4.6. Step 6: installing the Z stage in the machine
The following parts are needed in this step.
Letter Description Qnty. Letter Description Qnty.
A
leadscrew M8 1
D
bolts M3 x 16mm 4
B
Z stage 1
E
wooden parts 3B 2
C
12mm axes 2
2 x 4 x 2 x
image 92: parts needed for this step
To install the Z stage in the machine perform the following actions.
1. Place the Z stage in the machine.
2. Move 12mm axis through the TOP panel, and through the linear bearing
of the Z stage, see image 93.
3. Move the 12mm axis further, through the BOTTOM panel, see image 93.
4. Do the same for the second 12mm axis, see image 93.
5. Attach wooden part 3B on top of the 12mm axes.
Use two bolts M3 x 16mm for each wooden part 3B.
A B C D E