Ultimaker Original, Руководство по сборке, Страница: 16 / 109

Step 3: Assembling the X and Y motor Assembling the frame
16
To attach the BLACK wired limit switch with SHORT wires, perform the
following actions:
1. Place the BLACK wired limit switch with SHORT wires as shown in
image 8.
Fine tuning the position will be described in another part of this
manual.
2. Attach the BLACK wired limit switch with SHORT wires.
Use two bolts M3 x 16mm.
1-2mm
image 8: attaching the BLACK wired limit switch with SHORT wires
6.1.3. Step 3: Assembling the X and Y motor
The following parts are needed in this step.
Letter Description Qnty.
A
LEFT panel 1
B
BACK panel 1
C
motors with long wires and rounded axles 2
D
black spacers 8
E
M3 washers 8
F
short timing belts 2
G
pulleys with a 5mm internal diameter 2
H
bolts M3 x 20mm 8