Ultimaker Original, Руководство по сборке

Страница: 57 / 109

Step 3: attaching the housing on the XY frame Assembling the extrusion head
57
5
Notice: make sure the FRONT side of the extruder head is faced to
the FRONT panel.
image 71: moving the X and Y axes into the extruder head
3. Move the X axis in the LEFT slider block, see image 72.
5
Notice:
make sure the Y axis do not fall out.
4. Move the Y axis in the FRONT and BACK slider blocks, see image 72.
5. Turn the RIGHT slider block.
6. Move the X axis in the RIGHT slider block.
5
Notice: make sure the X and Y axis are placed in the right order in the
slider blocks to prevent the X and Y axis from bending.
7. Move the wooden part C in FRONT, BACK and RIGHT slider blocks.
8. Attach ONE bolts M3 x 30mm in each FRONT, BACK and RIGHT slider
blocks, see image 73.
5
Notice: do not tight the bolts M3 x 30mm yet.
9. Attach the wooden parts C.
10. Tighten the bolts M3 x 30mm
5
Notice: Do not force. Make sure the X and Y axis do not bend.
image 72: moving the X and Y axis into the slider blocks