Ultimaker Original, Руководство по сборке

Страница: 104 / 109

Slicer software Using the Ultimaker Original for the first time
104
Directly via the computer
1. When the Ultimaker is connected with the computer just hit print to
print it.
2. Download Pronterface/Printrun. For windows https://github.com/
kliment/Printrun. For mac http://koti.kapsi.fi/~kliment/printrun/
pronterface-mac-Mar2012.zip. Because Netfabb cannot communicate
with the Ultimaker.
3. Scroll down to the bottom of the page and click Windows >
Precompiled version.
4. Download Printrun-win, and unpack pronterface.zip. Now you can
open Pronterface.
5. Connect your Ultimaker via an USB port and chose the RIGHT port
from the list.
6. It is most likely tty.usb.something. Feel free to try several ports if you
can not find it, nothing bad can come from this.
7. Set baudrate to:
57600 if you are running the default firmware (5D).
250000 if you are running Sprinter or Marlin firmware.
8. Click connect. If your printer doesn’t connect, chose a different usb
port. Make sure you have turned on your Ultimaker.
9. Go to File > Open and select the Gcode you want to print.
10. Preheat the nozzle of the Ultimaker to 180°C.
11. Click ‘Print’.
Via the Ulticontroller
1. To print it with the Ulticontroller, save your gcode to SD card for
example.
2. Place the SD card into the SD slot on the LEFT of your Ulticontroller.
3. On the screen it should say, Card inserted.
4. Press the navigation wheel, go to card menu and select the file you
want to print.
5. Your Ultimaker will go ‘home’ heat up to the RIGHT temperature and
calculate a path and start to print.