Setting up the Ultimaker 3
Unboxing
The Ultimaker comes in reusable, durable packaging, specially designed to protect your Ultimaker 3. To properly
unpack your Ultimaker 3 the following steps must be taken:
1.
Take the Ultimaker 3 out of the cardboard box.
2.
Loosen the strap by opening the buckle.
3.
Remove the top part of the styrofoam packaging with the two spools of filament and factory test
print in it.
4.
Take out the accessory box.
5.
Remove the styrofoam part that is placed at the front bottom side of the Ultimaker 3.
6.
Take the Ultimaker 3, remove the bottom styrofoam part and place the Ultimaker 3 on a flat
surface.
7.
Manually lift the build plate and remove the packaging material under the build plate.
8.
Cut the zip tie that secures the print head.
4
