CX6182
C
LEANING AND MAINTENANCE
19
7
Cleaning and maintenance
7.1
Cleaning
Clean the knob cylinder only with a commercially available household
cleaning agent and a damp cloth.
Do not use any abrasive or caustic cleaning agents.
7.2
Maintenance
7.2.1
Replacing the battery
CAUTION
Danger of injury caused by improper use
Do not charge, open or heat the battery.
Always replace discharged batteries with new batteries.
Pay attention to the correct polarity when inserting the
batteries.
Change the battery only with the door open. As long as the battery is removed,
the knob cylinder cannot engage and thus cannot unlock the door.
Hold the battery change card in front of the knob module or use the service
device CX6510 or ClexTouch CX6522 to enter the battery change position.
Press in the now unlocked sleeve-locking pins of the knob module with the
battery change tool and simultaneously pull out the sleeve.
Battery change in
battery phases 0, 1, 2
