CX6182
A
BOUT THIS DOCUMENT
3
1
About this document
This operating and assembly manual describes the Clex prime electronic double
knob cylinder with evaluation electronics on the protected inside (in short:
CX6182). It is part of the product and contains important information that is
necessary for proper operation and maintenance.
This operating and assembly manual is valid for all versions of CX6182 and is
intended for technicians, who are responsible for assembling and disassembling,
as well as for end customers
.
Read this operating and assembly manual carefully for smooth and safe
operation and follow the instructions given in it before operating the knob
cylinder.
Keep the operating and assembly manual in a safe place.
After the installation, hand over the manual to the end customer and make
sure that the customer is familiar with its use.
Uhlmann & Zacher GmbH does not assume any responsibility for disruptions or
hazards such as non-access to injured personnel, malfunctions, property damage
or other damages resulting from non-compliance with this operating and
assembly manual or incorrectly configured knob cylinders.
If there are still any doubts after reading this operating and assembly manual,
please contact your respective dealer or Uhlmann & Zacher GmbH directly.
1.1
Warnings
Warnings warn against hazards that may arise when using the knob cylinder.
There are two levels of warning that can be identified by the signal word:
Signal word
Significance
CAUTION
Indicates a hazard with a low risk that can lead to mild or
moderate injury if not avoided.
ATTENTION
Indicates a hazard that results in property damage.
1.2
Symbols
The following symbols may be used in this manual:
This symbol indicates an instruction that must be followed by the user.
This symbol indicates an entry in a list.
This symbol indicates useful and important information.
