CX6182
C
LEANING AND MAINTENANCE
20
Remove empty batteries and insert the new batteries, paying attention to the
polarity.
Press sleeve locking pins and again slide on the knob module sleeve. Ensure
that the locking pin latches correctly in the sleeve.
The knob module returns to the home position by presenting an authorized
key, by using the service device CX6510 or ClexTouch CX6522.
Check the knob module time, using the service device CX6510 or ClexTouch
CX6522 and adjust it if required.
When in battery phase 3, the knob module already is in battery change position.
The knob sleeve can be pulled out as described above.
Battery Change in
Battery Phase 3