CX2172/4
T
ABLE OF CONTENTS
20
4.2
Assembly
4.2.1 Assembling the square pin
The square pin has to be assembled before installation on the electronic
door handle (outside). This applies to all the versions and is shown here
using an example of the circular rosette version.
1
Electronic door handle
2
Spiral clamping pin
3
Square
4
Adapter sleeve for square (only for 7 mm square)
Insert the adapter sleeve into the square holder (if required)
Insert the square onto the retaining pin and into the square holder
Insert the spiral clamping pin into the square
1
3
2
4
