uhlmann & zacher CX2172, Руководство по эксплуатации и сборке

Страница: 32 / 45

CX2172/4 T
ABLE OF CONTENTS
32
5 Commissioning
Basically
,
there are two ways of managing a Clex private locking system and
thereby programming the electronic door handles:
 Management as programming / clearing system

Management using the CX2530 Keyng software and wireless stick
5.1 Programming the service key
In its original condition (delivery status), the service key is not yet programmed
into the electronic door handle. For example, to program the service key, the
door handle is woken up by holding a key in front of the reading unit. Upon
success, the door handle responds with three long audible beeps. Within the next
15 seconds, the service key can be programmed by holding it in front of the
reading unit. Once the service key has been programmed successfully, the door
handle indicates this with two short and one long beep.
After programming, the door handle enters the programming mode when the
service key is held up.
5.2 Management as programming / clearing system
5.2.1 Programming the key
 Hold the service key in front of the reading unit of the door handle. The door
handle enters the programming mode.
 Hold the key to be programmed in front of the reading unit until two short
audible signals indicate the success.

Optionally, program additional keys as described in the previous step.
 Hold the service key in front of the reading unit or wait 15 seconds to exit the
programming mode.
To create a key with toggle authorisation, hold the key for 3 seconds in front of
the reading unit during the programming process until the success is indicated by
3 short audible signals.
5.2.2 Delete key

Hold the service key in front of the reading unit of the door handle. The door
handle enters the programming mode.

Hold the key to be deleted in front of the reading unit until two long audible
signals indicate success.
 Optionally, delete additional keys as described in the previous step.

Hold the service key in front of the reading unit or wait 15 seconds to exit the
programming mode.
5.2.3 Delete all keys

Hold the service key in front of the reading unit of the door handle. The door
handle enters the programming mode.

Hold up the service key until the door handle exits the programming mode.

Within 60 seconds, return the door handle to the programming mode and
hold up the service key in front of the reading unit. In the meantime, the door
handle indicates success using short audible beeps.