Ugur USS 60 DTKL, Руководство по эксплуатации

Страница: 24 / 115

EN EN
C -INSTALLATION OF YOUR COOLER. C -INSTALLATION OF YOUR COOLER.
Hanging Installation
Before positioning, remove and disassemble all packaging materials and bottom wooden pallet of the product. (It may
be necessary to lift the cooler for removing the bottom pallet).
Insert the replacement parts inside your product according to the installation instructions. Only use genuine Uğur
spare parts.
Inauthentic spare parts may constitute danger for you and damage your product.
Place the product anywhere you desire. Consider the placement rules written in the manual while positioning the
product.
Balance your product in width and in depth by means of a water gauge. Perform balancing operation by using
adjustable feet at the bottom front of your cooler. (Picture 9)
In models with wheels (optional), wheel brake (optional) must be locked or if there is no wheel brake, it must be
guaranteed that the device will not move after the positioning of the product.
DİKKAT!
• There is wall hanging apparatus only behind USS 60 / USS 95 and USS 100 models. You do not need to
leave an additional gap for these models.
Model A DIMENSION MAX. LOADING CAPACITY
USS 95 DTKL 360 30 Kg.
USS 60 DTKL 345 20 Kg.
2 holes with the diameter of 7 mm and depth of 40 mm are drilled on a surface, the
solidness of which is ensured, on the A axis which you have determined according to the
device.
Expansion bolt of 8 mm is driven into both holes tightly.
2 screws of 4,8x38 YSB DIN NO:7981 are inserted into the expansion bolt that are driven
tightly.
It is necessary to leave the distance of 2-3 mm between the head of the screw and the
expansion bolt and for inserting the hanging plates behind the cooler to the screws.
Note: Leaving the screws excessively long may cause detachment of the cooler.
Make sure that the slot hole on the hanging plate behind the cooler fits securely.
While hanging the device onto the expansion bolt, you can align the screw and slot hole
from the hole on the side surface of the hanging plate.
Picture 9
46 47