UGO BASILE PAM, Инструкция по эксплуатации

Страница: 24 / 43

UGO BASILE - I
TALY
Page 14
38500 Instruction Manual (Rev. 1)
4.4.2 View Acquired Data
Selecting View Acquired Data from the Measure menu and pressing Select this displays
the total number of stored measurements and then a screen similar to:
Press
Previous to view the test before the one being displayed. In the above example,
pressing Previous would display test 70 as the test numbering ‘wraps round’.
Press Next to view the next stored test.
Press Exit to return to option 1 of the Measure menu (i.e. measure peack force).
4.4.3 Memory Status
Selecting Memory Status from the Measure menu displays a screen similar to:
This example indicates that 75.4% of PAM’s data memory is available to store further
measurements. The estimated value of
>547 for Tests left shown above is based on the
assumption that future measurements will be similar in length to those already stored. The
number of tests that can be stored, strongly depends on the duration of each test.
Press Return to return to the first Measure menu option.
4.4.4 Transfer Data to PC
This option allows data stored in PAM’s memory to be transferred to a PC. It requires that
PAM is connected to a PC via the USB cable supplied and that the PC is running
appropriate software such as the
PAM PC software provided with the instrument. Detailed
operation is covered later in this manual under PC Software .
If this option is selected in the absence of a connected PC which is running appropriate
software, PAM displays
PC not available for a few seconds and then returns to the first
option on the Measure menu.
4.4.5 Erase Memory
Selecting Erase Memory from the Measure menu displays:
16/09/09 10:34:15
No 1 Auto
234.5gf at 3.55s
Previous Exit Next
Memory Status
Available 75.4%
Tests left: >547
Back