Page 18
37360 Instruction Manual (Rev. 0)
From the
MEMORY
Menu, the
F2
(
OUT
) key enables the researcher to export the data
stored in the internal memory to the Memory Key or to print them on the MiniPrinter.
You can now select the data output path, see paragraph 6, by depressing:
F2
(
EPR
) to select an External Printer (*) via
COM2, located on the back panel, see par-
agraph 4.6.1.
(*) customer printer connected in serial on
COM2 at 9600 baud-rate
F3
(
MSK
) to select the
Memory Key,
inserted in its slot on the front panel.
To interrupt the print-out response of the
stored data, depress the
F4 (ESC)
key for
one second at least.
Before starting a new experimental session, we suggest checking the
memory which may contain some data of the previous trial.
If it is the case, enter the proper software level and
RESET
the memory, see
paragraph 7.1
7.1 Memory
Reset
From the Memory menu, the
F3
key (
RES
)
enables the operator to reset the data
stored in the memory.
Answer (
YES
) (
F3
key) or (
NO
) (
F4
key) to
the question: “
ARE YOU SURE
?”.
