UFO Basic L, Инструкция по установке, эксплуатации и обслуживанию

Страница: 36 / 55

Installation, Operation and Maintenance Manual
UFO
uk.ufosecurity.com 36
- 6 flashes: WPS mode, in this mode it is possible to connect the UFO to the
router without entering the password. WPS mode must
als
o be activated on
the router.
- 7 flashes: Reset Wi-Fi settings;
- 8 flashes: Power off.
MULTI-DEVICE NETWORK MODE
With the Multi-Device Network mode each UFO fogger can be associated with
a network identified with 4 characters (e.g. Test, Netw...). Machines within a
network can be set as Master or Slave. Master devices will send each command
they receive to all other devices in the same network. Slave devices in a network
will be able to receive commands from other Master devices belonging to their
same network.
Furthermore, when associating a device to a network, it will be configured as
Slave by default.
For example, if you associate 3 fog machines UFO1, UFO2 and UFO3 to the
“Test” network, and then set UFO2 as Master, in this network you will have 1
Master (UFO2) and 2 Slaves (UFO1 and UFO3). If you have a remote control
associated with UFO2, pressing the Total Arming button will arm UFO2 and
send the same command to all the other fog monitors in the same network, in
this case to UFO1 and UFO3. If at this point a Pir sensor associated with UFO1
detects movement, it will send the alarm command to the latter, and UFO1 will
send the same command to UFO1 and UFO3. So the foghorns will all fire at the
same time.
Nothing prohibits associating a sensor with a Slave device. In this case, the
command sent by the sensor to the fog generator will not be sent to other
devices.
For more information on configuring the Multi-Device Network mode, please
refer to the Configuring Multi-Device-Network Mode section under Ufo Security
App. A video tutorial is also available on the Ufo Security YouTube channel.