UCL SWIFT TEK-3 Скачать руководство пользователя страница 15

Страница: 15 / 29

PAGE 4

3330 Earhart Drive, Suite 208

Carrollton, TX 75006

Office: 972.556.0916

Fax: 972.910.8384

OPM1

The OPM1 can be used in a live streaming mode with the SWIFT brand software.

•

With the OPM1 plugged in via USB, place the SWIFT brand software into Active Mode by navigating to

Settings > Data Mode > Active Mode.

•

Click the Save button on-screen to save the live reading displayed in the window. Save as many readings

as needed.

•

To create the final report, click File > Export to Excel.

UNPACKING & INSPECTION

The OPM1 is supplied with a 2.5mm adapter installed on the unit, a LC 1.25mm adapter is also included in

the kit, 3.0V CR2 battery, USB cable, and an instruction card. Contact SWIFT immediately if any part of the

unit or packaging is damaged, or otherwise unsatisfactory.

LOW BATTERY

The OPM1 provides over 1000 operations under normal conditions. When the BATT indicator is shown on

the device screen, the CR2 battery should be recharged or replaced, depending on the battery type.

OPTICAL CONNECTOR INTERFACE

The OPM1 is equipped with a universal connector adapter that is compatible with many popular style connectors.

The connector adapter interface should be kept covered and protected from contamination. Care must be taken to

avoid objects that may damage the glass surface of the detector mount. If scratches or breaks occur on the surface,

please contact UCL Swift NA for proper service.

CALIBRATION

All SWIFT brand products include a 2-year warranty. SWIFT recommends recalibration every two years to

ensure adherence to NIST measurement standards. The first recalibration is free within the warranty period.

DATA STREAMING

MAINTENANCE

Содержание TEK-3






























Результаты поиска

Содержание TEK-3

Отзывы:

Похожие инструкции для TEK-3

Бренды по названию

Популярные бренды

UCL SWIFT TEK-3, Руководство по обучению

Результаты поиска

Содержание TEK-3

Отзывы:

Похожие инструкции для TEK-3

Бренды по названию

Популярные бренды