UCL SWIFT TEK-3 Скачать руководство пользователя страница 22

Страница: 22 / 29

PAGE 4

3330 Earhart Drive, Suite 208

Carrollton, TX 75006

Office: 972.556.0916

Fax: 972.910.8384

OPM1

EXAMPLE 2:

SINGLEMODE FIBER, POINT-TO-POINT, 2 JUMPERS

Fiber Type
Connectors Used
Test Jumper Setup
OPM Used
OLS Used

Singlemode

(2) Simplex jumpers: (1) SC/LC + (1) LC/LC
OPM1
LSSM

Page 5

M-UM038-01 RP 460 Reference and Test

DMT

Example 2: Singlemode Fiber, Point-to-Point, 2 Jumpers

Fiber Type

Singlemode

Connectors Used

Test Jumper Setup

Double

OPM Used

RP 460

OLS Used

DLS 355

Fiber-Under-Test
The fiber-under-test is singlemode with LC

connectors on each end. This method allows testing

of connectors inside bulkheads. One or both ends of

this fiber-under-test may be inside bulkheads. The

fiber-under-test may be up to 250 kilometers long.

In this example, the fiber-under-test is 400 meters

long.

Test Jumpers
The test jumpers are both one-meter singlemode

fiber. One has one SC and one LC connector, and

the other has two LC connectors.

Power Meter
The RP 460 power meter is set to the

1550nm wavelength. The 1310nm

wavelength may also be used. Always

match the wavelength on the RP 460

to the wavelength on the DLS 355. The

adapter on the RP 460 is the AC 029 LC

adapter.

Light Source
The DLS 355 laser source is set to the

1550nm wavelength. The 1310nm

wavelength may also be used. The

adapter is the default AC 022B SC adapter.

Page 3

M-UM038-01 RP 460 Reference and Test

DMT

Example 1: Singlemode Fiber, Point-to-Point, 1 Jumper

Fiber Type

Singlemode

Connectors Used

Test Jumper Setup

Single

OPM Used

RP 460

OLS Used

DLS 355

Fiber-Under-Test
The fiber-under-test is singlemode with LC

connectors on each end. The fiber-under-test may

be up to 250 kilometers long. In this example, the

fiber-under-test is 400 meters long.

Test Jumper
The test jumper is a one-meter singlemode fiber

with SC and LC connectors. The SC connector will

be plugged into the DLS 355 laser source and the

LC connector will be used to interface with the

fiber-under-test.

Power Meter
The RP 460 power meter is set to the

1550nm wavelength. The 1310nm

wavelength may also be used. Always

match the wavelength on the RP 460

to the wavelength on the DLS 355. The

adapter on the RP 460 is the AC 029 LC

adapter.

Light Source
The DLS 355 laser source is set to the

1550nm wavelength. The 1310nm

wavelength may also be used. The

adapter is the default AC 022B SC adapter.

400m Fiber

1m Jumper

The fiber-under-test is singlemode with LC connectors on

each end. This method allows testing of connectors inside

bulkheads. One or both ends of this fiber-under-test may

be inside bulkheads. The fiber-under-test may be up to

250 kilometers long. In this example, the fiber-under-test

is 400 meters long.

TEST JUMPER

The test jumpers are both one-meter singlemode fiber.

One has one SC and one LC connector, and the other

has two LC connectors.

POWER METER

The OPM1 power meter is set to the 1550nm

wavelength. The 1310nm wavelength may also

be used. Always match the wavelength on the OPM1

to the wavelength on the LSSM. The adapter on the

OPM1 is the OPAL LC adapter.

LIGHT SOURCE

The LSSM laser source is set to the 1550nm

wavelength. The 1310nm wavelength may also be

used. The adapter is the default OPAS SC adapter.

FIBER-UNDER-TEST

400m Fiber

1m Jumpers

Connectors Inside

Bulkheads

Содержание TEK-3






























Результаты поиска

Содержание TEK-3

Отзывы:

Похожие инструкции для TEK-3

Бренды по названию

Популярные бренды

UCL SWIFT TEK-3, Руководство по обучению

Результаты поиска

Содержание TEK-3

Отзывы:

Похожие инструкции для TEK-3

Бренды по названию

Популярные бренды