UCL SWIFT TEK-3 Скачать руководство пользователя страница 24

Страница: 24 / 29

PAGE 6

3330 Earhart Drive, Suite 208

Carrollton, TX 75006

Office: 972.556.0916

Fax: 972.910.8384

OPM1

EXAMPLE 3:

SINGLEMODE FIBER, PAIRED, LOOPBACK JUMPER

Fiber Type
Connectors Used
Test Jumper Setup
OPM Used
OLS Used

Singlemode

Loopback
OPM1
LSSM

Page 7

M-UM038-01 RP 460 Reference and Test

DMT

Example 3: Singlemode Fiber, Paired, Loopback Jumper

Fiber Type

Singlemode

Connectors Used

Test Jumper Setup

Loopback

OPM Used

RP 460

OLS Used

DLS 355

Fiber-Under-Test
The fiber-under-test is paired singlemode

with paired LC connectors on each end. The

fiber-under-test may be up to 250 kilometers long.

In this example, the fiber-under-test is 400 meters

long.

Test Jumper
The test jumper is paired for loopback testing. One

end has an SC connector and an LC connector,

and the other end has two LC connectors clipped

together. This method also uses a singlemode

loopback adapter. It should be blue and have a

duplex bulkhead on the end.

Power Meter
The RP 460 power meter is set to the

1550nm wavelength. The 1310nm

wavelength may also be used. Always

match the wavelength on the RP 460

to the wavelength on the DLS 355. The

adapter on the RP 460 is the AC 029 LC

adapter.

Light Source
The DLS 355 laser source is set to the

1550nm wavelength. The 1310nm

wavelength may also be used. The

adapter is the default AC 022B SC adapter.

Page 3

M-UM038-01 RP 460 Reference and Test

DMT

Example 1: Singlemode Fiber, Point-to-Point, 1 Jumper

Fiber Type

Singlemode

Connectors Used

Test Jumper Setup

Single

OPM Used

RP 460

OLS Used

DLS 355

Fiber-Under-Test
The fiber-under-test is singlemode with LC

connectors on each end. The fiber-under-test may

be up to 250 kilometers long. In this example, the

fiber-under-test is 400 meters long.

Test Jumper
The test jumper is a one-meter singlemode fiber

with SC and LC connectors. The SC connector will

be plugged into the DLS 355 laser source and the

LC connector will be used to interface with the

fiber-under-test.

Power Meter
The RP 460 power meter is set to the

1550nm wavelength. The 1310nm

wavelength may also be used. Always

match the wavelength on the RP 460

to the wavelength on the DLS 355. The

adapter on the RP 460 is the AC 029 LC

adapter.

Light Source
The DLS 355 laser source is set to the

1550nm wavelength. The 1310nm

wavelength may also be used. The

adapter is the default AC 022B SC adapter.

400m Fiber

1m Jumper

The fiber-under-test is paired singlemode with paired LC

connectors on each end. The fiber-under-test may be up

to 250 kilometers long. In this example, the

fiber-under-test is 400 meters long.

TEST JUMPER

The test jumper is paired for loopback testing. One end

has an SC connector and an LC connector, and the other

end has two LC connectors clipped together. This

method also uses a singlemode loopback adapter. It

should be blue and have a duplex bulkhead on the end.

POWER METER

The OPM1 power meter is set to the 1550nm

wavelength. The 1310nm wavelength may also be

used. Always match the wavelength on the OPM1 to

the wavelength on the LSSM. The adapter on the OPM1

is the OPAL LC adapter.

LIGHT SOURCE

The LSSM laser source is set to the 1550nm

wavelength. The 1310nm wavelength may also be used.

The adapter is the default OPAS SC adapter.

FIBER-UNDER-TEST

400m Paired Fiber

1m Paired Jumper

Singlemode Loopback

Содержание TEK-3






























Результаты поиска

Содержание TEK-3

Отзывы:

Похожие инструкции для TEK-3

Бренды по названию

Популярные бренды

UCL SWIFT TEK-3, Руководство по обучению

Результаты поиска

Содержание TEK-3

Отзывы:

Похожие инструкции для TEK-3

Бренды по названию

Популярные бренды